Hodoor Performance Custom Forged Wheels
Hodoor Performance Custom Forged Wheels — Made to Your Specification
Hodoor Performance Custom Forged Wheels are produced in-house by the Hodoor World team — the same specialists who source, fit, and ship premium wheels globally. Every set of Hodoor Performance wheels starts with a blank page: you define the spoke pattern, finish, diameter, width, backspacing, and bolt pattern, and our engineers forge the wheel to your exact specification. There are no catalogue constraints, no minimum runs, and no compromise on quality. Each wheel is machined from aircraft-grade forged aluminum billet and inspected before dispatch.
Hodoor Performance Custom Forged — Available Sizes
- Diameters: 13" | 14" | 15" | 16" | 17" | 18" | 19" | 20" | 21" | 22" | 23" | 24"
- Available Widths: 5J | 6J | 7J | 8J | 9J | 10J | 11J | 12J | 13J | 14J | 14.5J
- Backspacing / Offset: Any ET, positive or negative, specified at order stage
- Center Bore: Machined to any hub diameter — OEM-specific or custom
- PCD / Bolt Patterns: Any 4-, 5-, 6-, or 8-lug pattern; dual-drilled available
Need a Different Size?
Because Hodoor Performance wheels are produced entirely to order, any diameter, width, offset, and bolt pattern combination is available — including sizes outside the standard aftermarket catalogue. Whether you need an uncommon 14×7J fitment for a classic, or a 24×14J with extreme negative offset for a show build, our engineering team will confirm feasibility and produce to specification. Contact our specialists at [email protected] or +44 748 8818 747. We also offer an AI Wheel Design Service if you want a custom spoke pattern or finish concept designed before production begins.
Hodoor Performance Custom Forged — Construction Options
Hodoor Performance wheels are available in three structural configurations, selected at order stage based on your fitment and weight requirements:
1-Piece Forged Monoblock
Machined from a single forged aluminum billet — the lightest and structurally simplest option. The monoblock eliminates the barrel joint and associated hardware, producing a stiffer wheel with fewer potential failure points. Backspacing is fixed at the machining stage, so precise fitment data (lift height, tyre size, hub offset) is required at order. Recommended for performance builds where unsprung weight is a priority, and for daily-driven vehicles where the lower maintenance of a one-piece structure is preferred.
2-Piece Forged
A forged aluminum face joined to a spun aluminum barrel via aerospace-grade stainless steel barrel bolts. The 2-piece construction allows the barrel width to be independently set after face machining, providing adjustment flexibility for custom backspacing requirements. This is the preferred option for builds where precise backspacing may change with suspension configuration, or where the face design is to be retained with a different barrel width across multiple vehicles.
3-Piece Forged
A three-section assembly comprising a forged aluminum face, an outer barrel ring, and an inner barrel section, fastened with aerospace-grade stainless steel hardware throughout. The 3-piece architecture delivers the maximum fitment flexibility of any forged construction: face width, outer lip depth, and inner barrel depth are each dimensioned independently, enabling extreme concave profiles, complex two-tone hardware-exposed aesthetics, and staggered fitments that are not achievable with 1-piece or 2-piece designs. Hardware can be replaced independently, and the barrel sections are serviceable after impact or refinishing — making the 3-piece the preferred choice for show builds, extreme offsets, and clients who prioritize long-term visual impact and maximum customization over minimum unsprung weight.
Hodoor Performance Custom Forged — Technical Specifications
- Brand: Hodoor Performance (in-house brand)
- Country of Origin: Russia (manufactured and quality-controlled in-house)
- Construction: 1-Piece Forged Monoblock, 2-Piece Forged, or 3-Piece Forged (selected at order)
- Material: Aircraft-grade T6061 forged aluminum billet
- Design: Any spoke pattern — custom CAD, client-supplied, or developed in-house
- Lug Configuration: 4, 5, 6, or 8 lug; dual-drilled available
- Available Widths: 5J to 14.5J
- Load Rating: Specified per build based on wheel dimensions and intended use
- TPMS: Compatible; hub-centric rings included
- Finish Options: Gloss Black, Matte Black, Brushed, Polished, Chrome, Powder-coat (any RAL colour), Custom Paint, Two-tone, Carbon Inserts
- Production Time: 2–4 weeks from design confirmation
- Price: Per full set of 4 wheels — contact for a personalised quote
Vehicle Fitment — Hodoor Performance Custom Forged
Because every set is produced to specification, Hodoor Performance Custom Forged wheels are available for any vehicle platform — from JDM sport compact to full-size American truck, luxury SUV to hypercar:
- Luxury Saloons and Coupes: Rolls-Royce, Bentley, Mercedes-Benz S/E/G/AMG, BMW 7/8 Series, Porsche Panamera/Taycan — bespoke sizing with custom offset for staggered or square fitments
- Supercars and Hypercars: Lamborghini Urus/Huracán/Aventador, Ferrari 488/F8/SF90, McLaren 720S/Artura — ultra-lightweight monoblock for centre-lock and lug-bolt platforms
- SUVs and Crossovers: Range Rover, Porsche Cayenne, Bentley Bentayga, Mercedes GLE/G-Class, Aston Martin DBX — 22"–24" with hub-specific centre bores
- Trucks and Off-Road: Ford F-150/Raptor, RAM TRX, Chevrolet Silverado, Toyota Land Cruiser — custom backspacing for lifted and stock configurations; 6- and 8-lug available
- Classic and Historic Vehicles: Any uncommon PCD or diameter reproduced in forged aluminum — stronger and lighter than original steel or cast fitments
- Show and Competition Builds: Custom face geometry, extreme widths and offsets, multi-piece hardware, and colour-coded finish — engineered for aesthetic and functional requirements simultaneously
Other Bolt Patterns Available
Hodoor Performance wheels are produced to any PCD — the following are common requests, but any pattern is achievable:
- 4×98 — Fiat, Alfa Romeo, Lancia
- 4×100 — Honda Civic (EG/EK), Mazda MX-5, Toyota Yaris
- 4×108 — Ford Focus/Mondeo, Peugeot, Citroën, Volvo
- 5×100 — Subaru Impreza/Forester, Volkswagen Golf Mk4/Mk5, Audi TT
- 5×108 — Ford Mustang (some), Land Rover Freelander, Jaguar XF
- 5×112 — Mercedes-Benz, Audi (most), Volkswagen Touareg, Bentley
- 5×114.3 — Nissan, Honda, Toyota, Mitsubishi, Hyundai/Kia
- 5×120 — BMW, Land Rover, Rolls-Royce, Bentley Mulsanne
- 5×127 — Jeep, Chrysler, some Cadillac
- 5×130 — Porsche (most models), Volkswagen Phaeton
- 5×150 — Toyota Tundra, Sequoia, Land Cruiser 200/300, Lexus LX
- 6×139.7 — Toyota Hilux, Land Cruiser 70/80, Mitsubishi L200, Nissan Patrol
- 8×165.1 — Ford Super Duty, RAM 2500/3500
- Centre-lock — Ferrari, McLaren, Lamborghini, Porsche GT models
- Custom / dual-drilled — available on request
Custom Design Process — Hodoor Performance
The Hodoor Performance custom forged wheel process begins with a design consultation and ends with a complete, quality-checked set delivered to your door:
- Design Consultation: Describe your concept — reference images, spoke geometry, finish preference, and any specific aesthetic requirements. Our team can develop a CAD rendering for approval before machining begins. Use our AI Wheel Design Service to generate concept visuals in minutes.
- Fitment Specification: Provide your vehicle make, model, year, hub diameter, bolt pattern, tyre size, and any suspension modifications. Our engineers calculate the correct diameter, width, and backspacing combination for your build.
- Design Approval: A 3D rendering and technical drawing are sent for client approval before production commences. Revisions are included at this stage.
- Forging and Machining: Each wheel is forged from T6061 billet, then CNC-machined to the approved design. Production takes 2–4 weeks from final design sign-off.
- Quality Control: Every wheel is load-tested, inspected for dimensional accuracy, and checked against the approved drawing before finishing.
- Finishing and Dispatch: Specified surface treatment applied, hardware installed, and the set packaged for international delivery with commercial insurance.
Hodoor Performance vs Third-Party Forged Brands
| Feature | Hodoor Performance | Catalogue Brand (e.g. Vossen, HRE) |
|---|---|---|
| Spoke Design | Any — fully custom | Fixed catalogue designs |
| Sizes | Any diameter/width combination | Listed sizes only |
| Bolt Pattern | Any PCD, dual-drill, centre-lock | Common PCDs only |
| Finish | Any — RAL match, custom paint, multi-tone | Manufacturer's listed finishes |
| Production Time | 2–4 weeks | 4–10 weeks (for custom configs) |
| Personalisation | Full — engraving, branding, centre lock options | Limited to finish and size options |
| Design Rendering | 3D CAD rendering provided before production | Visualiser tool or static images |
Hodoor Performance Custom Forged — Model Lineup
Can't Find the Right Wheel? Full Custom Programme
Every Hodoor Performance wheel is already fully custom — but for clients with particularly complex requirements (centre-lock conversion, dual-drill, ultra-wide barrels, or bespoke engraving), our engineering team handles the specification directly. Hodoor offers a custom forged wheel manufacturing service as the core of the Hodoor Performance brand. You can also use our AI Wheel Design Service to visualise your concept before production begins.
FAQ — Hodoor Performance Custom Forged Wheels
Q: Can I provide my own design sketch or reference image?
A: Yes. Bring any image, sketch, or CAD file — our engineers will develop it into a production-ready design. We also offer the AI Wheel Design Service if you want a visual concept generated from a text description.
Q: What is the minimum order quantity?
A: One set of four wheels is the standard order. Single-wheel orders for spares are available on request.
Q: Is a 3D rendering provided before production starts?
A: Yes. Every order includes a design approval stage with a 3D rendering. Production does not commence until you have signed off the design.
Q: What is the production lead time?
A: Standard lead time is 2–4 weeks from design approval. Complex finishes (custom paint matching, carbon inserts) may add 1–2 weeks.
Q: Can you match my car's paint colour exactly?
A: Yes. Provide the OEM paint code or a colour sample, and the finishing team will match it for a full colour-coded build.
Q: Does Hodoor ship internationally?
A: Yes. All Hodoor Performance orders ship worldwide with commercial insurance, tracked delivery, and full customs documentation. EU: 5–10 days; Middle East: 7–14 days; North America: 10–16 days; Asia-Pacific: 12–21 days.
Q: Can I have my name, logo, or custom text engraved?
A: Yes — bespoke engraving is available on spoke faces, barrel lips, and center caps. Specify at the order stage.
Discover Hodoor World
Hodoor World operates across London, Cannes, Miami, and Geneva as a specialist premium wheel and tuning retailer. The Hodoor Performance brand represents our in-house forged wheel programme — the same team that fits and supplies wheels from HRE, Vossen, Brixton, and other leading manufacturers is also behind the Hodoor Performance production line.
- In-house design and production capability — no intermediary
- Fitment consulting for any vehicle platform globally
- Worldwide delivery with commercial insurance and real-time tracking
- After-sales support: custom centre caps, hardware, and finish touch-up
- Rated Excellent on Trustpilot
Wheel Care — Hodoor Performance Custom Forged
- Break-In Period: Re-torque lug nuts to the specified torque after the first 50 miles of driving on any new forged wheel set.
- Finish-Specific Care: Use pH-neutral wheel cleaner on all Hodoor Performance finishes. Acidic or alkaline products will damage powder-coat and chrome finishes. Custom paint surfaces benefit from ceramic coating within the first month.
- Iron Fallout: Monthly iron fallout remover for street-driven builds; allow 3–5 minutes dwell time and rinse thoroughly.
- 2-Piece Hardware: If a 2-piece set was ordered, inspect barrel bolts every 6,000 miles. Torque to specification with a calibrated torque wrench only.
- Engraving Maintenance: Engraved areas should be treated with a penetrating wax or sealant annually to prevent oxidation in the recessed machined surfaces.
Hodoor Performance Custom Forged — International Delivery
All Hodoor Performance sets ship from production to your door with full commercial insurance, export documentation, and end-to-end tracking. Delivery estimates: EU 5–10 business days; Middle East 7–14 days; North America 10–16 days; Asia-Pacific 12–21 days. For time-sensitive projects, express shipping is available — contact [email protected] or +44 748 8818 747 to discuss your timeline.
