BJ Wheels Race Series: Complete Model Guide 2026 — V1, V2, V3, V4-Race

BJ Wheels — Who They Are and Why It Matters

BJ Wheels specializes in flow-formed performance wheels built for the European sport and luxury segment. The brand focuses on a narrow, well-executed lineup of Race-series designs — lightweight construction, aggressive concave profiles, and 5×112 bolt pattern coverage that fits the core of the German car market: Audi, Volkswagen, Mercedes-AMG, and the broader VAG family.

Unlike cast-wheel brands that compete on price, BJ Wheels sits in the performance-value tier: wheels engineered to deliver measurable gains in unsprung mass without demanding forged-wheel budgets.

What Is Flow-Forming?

Flow-forming starts with a cast aluminum blank, then uses high-pressure rollers to stretch and compress the barrel while it spins at speed. This aligns the aluminum grain structure along the barrel wall — the same effect as forging, applied selectively to the area that takes the most stress.

The result: barrel walls 20–30% thinner than conventional casting with equal or greater structural rating. Typically 1–2 kg lighter than an equivalent cast wheel — without the price premium of full forging.

BJ Wheels Race Series — Full Model Overview

BJ Wheels V1-Race — 19-Inch Entry to the Lineup

The V1-Race is a 5-spoke design in 8.5×19 ET45 with 5×112 bolt pattern. Clean spokes, moderate concave, suitable for builds where fitment precision matters more than aggressive offset. Compatible with the full VAG 5×112 family from Golf R to Audi RS3.

→ BJ Wheels V1-Race — Product Page

BJ Wheels V2-Race — Stepping Up to 20 Inches

The V2-Race moves to 8.5×20 ET45 — the same spoke architecture scaled to 20-inch diameter preferred for wider rubber on RS and AMG platforms. Improves brake caliper clearance on bigger setups. Natural fit for Audi RS4/RS6, Mercedes-AMG C63, Volkswagen Touareg R.

→ BJ Wheels V2-Race — Product Page

BJ Wheels V3-Race — Aggressive Spoke Geometry in 19 Inch

Returns to 8.5×19 ET45 with a redesigned spoke profile — more aggressive concave and a tighter visual fill compared to the V1. For builds where the 19-inch diameter is preferred but the aesthetic needs to match the aggression of wider-tire setups on sports coupes and hot hatches.

→ BJ Wheels V3-Race — Product Page

BJ Wheels V4-Race — The Flagship Flow-Formed Wheel

At 8.5×19 ET45, 5×112, 66.6mm center bore, the V4-Race weighs 9.5 kg — firmly in the performance category for a production flow-formed wheel. TÜV certified, road-legal across Germany and the EU without additional documentation. The spoke profile maximizes concave depth while maintaining structural efficiency under track conditions.

→ BJ Wheels V4-Race — Full Specs, TÜV Certs & Fitment Guide

Model Comparison

5×112 Fitment — Cars the BJ Race Series Fits

• Audi: RS3 (8Y/8V), RS4 (B9), RS5, RS6, RS7, TTRS, TT (8S)
• Volkswagen: Golf R (Mk7/Mk8), Golf GTI, Golf 7/8, Passat, Arteon, Tiguan R
• Mercedes-AMG: A35/A45 AMG, C43/C63, E53/E63, CLA 45 AMG
• SEAT / CUPRA: CUPRA Formentor, CUPRA Leon, Ateca
• Škoda: Octavia RS, Kodiaq RS, Superb

For other bolt patterns — custom forged wheels can be produced in any PCD on request.

Need a Different Size or Custom Spec?

Our Custom Forged Wheel Manufacturing Service produces one-off and small-run forged wheels to any spec: diameter 17–24 inches, custom PCD, custom ET, any color or finish. Minimum order: 1 wheel. Lead time: 4–8 weeks. Start with the AI Wheel Design Service to visualize your concept before production.

Discover More

• Browse the Full Forged Wheels Collection
• Custom Forged Wheel Manufacturing

Questions? [email protected] · WhatsApp +44 7488 818747 · Reviews on Trustpilot.

FAQ — BJ Wheels Race Series

Are BJ Wheels flow-formed or forged?

Flow-formed: cast blank plus high-pressure barrel rolling. Produces measurably stronger barrel walls vs. standard casting. Full forging is a separate, higher-cost category; BJ Wheels occupy the performance segment below forged pricing but above standard cast.

Does the V4-Race have TÜV certification?

Yes. Certificates are available on the product page and can be provided to your TÜV inspector. For other Race-series models — ask us about certification status when ordering.

Can BJ Wheels be fitted to non-5×112 cars?

The Race series is 5×112 only. For 5×120 BMW, 5×114.3 Toyota/Nissan, 5×130 Porsche — see our full forged wheels catalog or order custom-spec through our manufacturing service.

What is the difference between V1, V3, and V4 — all 19 inches?

Three distinct spoke geometries: V1-Race is the cleanest design, V3-Race has a more aggressive concave, V4-Race is the most refined — 9.5 kg, TÜV certified, built for performance use. Choose based on aesthetic preference, intended use, and TÜV requirement.

What is the hub bore on the V4-Race?

66.6mm — matches the standard Audi/VAG spec. Hub centric rings available for other center bore diameters.

How long does shipping take?

Standard shipping to Europe: 5–10 business days. Contact [email protected] for exact lead times.